Ricoh 480W 参考指南
![Ricoh](https://files.manualsbrain.com/attachments/5d75c15ccccf2674dc37d8acfe0fae2e288880f8/common/fit/150/50/7e2e9af8081fa1a72a9fce0a1dbc35e689c173f116f15720716c2ad6d183/brand_logo.png)
TOOLS
continued.
RW-480 PLOTBASE signal lights
The RW-480 PLOTBASE signal lights show the status of a print
job (three circles) and the printing mode (auto):
job (three circles) and the printing mode (auto):
The three round areas describe the respective print status using
three different colors:
• Red field:
A print problem is indicated if the left-hand field is red. The
precise cause is described in the status window. The faulty
job is marked red in the jobs list. Double click on the faulty
precise cause is described in the status window. The faulty
job is marked red in the jobs list. Double click on the faulty
job to see the error list.
• Blue field:
If the middle field is blue, this indicates that the user has to
act. It can be a locked print, a sample print or a necessary
operating of the bypass tray. These print jobs are also blue-
marked in the job list.
act. It can be a locked print, a sample print or a necessary
operating of the bypass tray. These print jobs are also blue-
marked in the job list.
• Green field:
If the right-hand round area is green, a print is currently
underway. This display goes off again as soon as all print
jobs have been accepted and processed by the plotter. Click
on the right-hand symbol surface "Auto" to activate or
deactivate the automatic print mode.You can see a cross on
underway. This display goes off again as soon as all print
jobs have been accepted and processed by the plotter. Click
on the right-hand symbol surface "Auto" to activate or
deactivate the automatic print mode.You can see a cross on
this button, if the function is deactivated. In this case the print
jobs arriving from other programs are not automatically sent
to the plotter and are not automatically printed. But you can
send a selected print job manually to the plotter using the
menu command "Job – Print" or the command "Print" in the
jobs arriving from other programs are not automatically sent
to the plotter and are not automatically printed. But you can
send a selected print job manually to the plotter using the
menu command "Job – Print" or the command "Print" in the
context sensitive menu.
RW-480 PLOTBASE 45