Ricoh 480W 参考指南
![Ricoh](https://files.manualsbrain.com/attachments/5d75c15ccccf2674dc37d8acfe0fae2e288880f8/common/fit/150/50/7e2e9af8081fa1a72a9fce0a1dbc35e689c173f116f15720716c2ad6d183/brand_logo.png)
CONFIGURATION
2. Now click on "Set up password".
3. Enter both the old and the new password (at least 4
letters) in the following dialog and enter the new
password once again in the bottom line.
4. Press "OK" to confirm. The system then tells you that the
password has been changed. Press "OK" again to
confirm.
confirm.
• Protect the "Properties" cards:
1. Open the card "Administration" under "Properties".
2. Enter the password in the box of the "Administration"
2. Enter the password in the box of the "Administration"
card and click on the button "Protect". The settings in the
"Properties" dialogs are now protected by password.
"Properties" dialogs are now protected by password.
3. You can see the protection function by the key which
appears on the "Administration" card. In addition, all
settings in the cards are deactivated.
settings in the cards are deactivated.
• Releasing the "Properties" cards:
1. Open the card "Administration" under "Properties".
2. Enter the password in the box of the administration card
and click on the button "Release". This releases the
settings in the "Properties" dialogs so that they can be
changed by any user. The protection symbol (key) on the
"Administration" card is now crossed out.
changed by any user. The protection symbol (key) on the
"Administration" card is now crossed out.
Change language
When starting the program for the first time, your RW-480
software comes up in the language you selected on installation
software comes up in the language you selected on installation
of the program.
But if you want to change the language of the program, you can
do that quickly and easily in three steps in Windows without any
further adjustments:
But if you want to change the language of the program, you can
do that quickly and easily in three steps in Windows without any
further adjustments:
1. Open the language setting using the menu point
"Configuration – Language".
2. Adjust the required language and press "OK" to confirm.
RW-480 PLOTBASE 79