Ricoh 480W 用户指南
Settings
99
9
❖
❖
❖
❖ Change Initial Mode
Select [Standard] to use the stand-
ard settings as the initial mode
which is the mode of the machine
immediately after the operation
switch is turned on or modes are
cleared or reset.
Select [Program No.10] to use the set-
tings stored in Program No.10 as
the initial mode.
ard settings as the initial mode
which is the mode of the machine
immediately after the operation
switch is turned on or modes are
cleared or reset.
Select [Program No.10] to use the set-
tings stored in Program No.10 as
the initial mode.
Selecting a custom size
When selecting [Custom Size] as the
scan size, follow the procedure be-
low.
scan size, follow the procedure be-
low.
AAAA
Press [Custom Size] on the Scan Size
Setting screen.
Setting screen.
Specifying Vertical and
Horizontal Measurements
(Length and Width)
Horizontal Measurements
(Length and Width)
A Enter the original size with the
number keys.
Select and enter values for [X1]
and [Y1], and then press the
Select and enter values for [X1]
and [Y1], and then press the
{{{{#}}}}
key.
B Enter the scan starting point in
relation to the standard scan
starting point.
Select and enter values for [X2]
and [Y2], and then press the
starting point.
Select and enter values for [X2]
and [Y2], and then press the
{{{{#}}}}
key.
C Enter the scan size (area) with
the number keys.
Select and enter values for [X3]
and [Y3], and then press the
Select and enter values for [X3]
and [Y3], and then press the
{{{{#}}}}
key.