Ricoh 480W 用户指南
Configuring/Registering Scan Settings
80
7
Programs
You can register frequently used set-
tings in the machine memory and re-
call them for future use.
tings in the machine memory and re-
call them for future use.
Note
❒ You can register up to 10 programs
for the scanner mode.
❒ You can use the settings registered
in program No.10 as the initial
mode by selecting [Program No.10]
in [Change Initial Mode] of [Scanner
Features]
mode by selecting [Program No.10]
in [Change Initial Mode] of [Scanner
Features]
.
❒ Programs are not deleted by turning
the power off or by pressing the
{{{{Clear Modes}}}} key. They are delet-
ed only when you delete them or
overwrite them with another pro-
gram.
ed only when you delete them or
overwrite them with another pro-
gram.
❒ Settings that can be registered as a
program are scan settings, standby
mode for additional originals,
loading orientation of the original,
output tray of the original, and file
format.
mode for additional originals,
loading orientation of the original,
output tray of the original, and file
format.
Registering a Program
AAAA
Make the settings you want to
register in the initial display of
the scanner mode.
register in the initial display of
the scanner mode.
BBBB
Press the
{{{{Program}}}} key.
CCCC
Press [
m
m
m
m Register].
DDDD
Press the program number you
want to register.
want to register.
Note
❒ Program numbers with m al-
ready have settings in them.
EEEE
Enter the program name with the
soft keyboard that appears on the
display panel.
soft keyboard that appears on the
display panel.
Note
❒ You can enter up to 40 charac-
ters.
❒ If it is not necessary to enter the
program name, proceed to step
.
FFFF
Press [OK].
When the settings are successfully
registered,
When the settings are successfully
registered,
m appears on the left
side of the registered program
number and the program name ap-
pears on the right side. The display
returns to the initial display after a
moment.
number and the program name ap-
pears on the right side. The display
returns to the initial display after a
moment.
AGH003S