Ricoh 480W 操作指南
Copying
30
2
Manual paper select
AAAA
Select the paper tray or paper by-
pass.
The selected tray key is highlight-
ed.
pass.
The selected tray key is highlight-
ed.
❖
❖
❖
❖ When the lower tray (paper roll
tray) is installed
❖
❖
❖
❖ When the cut paper trays are
installed
-
-
-
-Rotate Copy
If the original's width is different to
that of the paper set in the paper roll
tray, or the original's orientation (
that of the paper set in the paper roll
tray, or the original's orientation (
K
or
L ) is different to that of the paper
loaded in the cut paper trays, this
function rotates the original image by
90 degrees, to fit it onto the copy pa-
per.
function rotates the original image by
90 degrees, to fit it onto the copy pa-
per.
Note
❒ This function works when Auto
Paper Select is selected. See p.29
“Selecting Copy Paper”.
“Selecting Copy Paper”.
❒ The default for Auto Tray Switch-
ing is With image rotation. You
cannot use Rotate Copy if this set-
ting is changed to Without image
rotation or Off. See p.83 “Auto
Tray Switching”.
cannot use Rotate Copy if this set-
ting is changed to Without image
rotation or Off. See p.83 “Auto
Tray Switching”.
Setting the Length of Copy
Paper Cut
Paper Cut
Preparation
The following paper cut methods
are available.
are available.
❖
❖
❖
❖ Synchro Cut
Cuts the paper at the same
length as the original.
If the copy is enlarged or re-
duced, the machine calculates
the appropriate length for the
magnification ratio and cuts the
paper.
length as the original.
If the copy is enlarged or re-
duced, the machine calculates
the appropriate length for the
magnification ratio and cuts the
paper.
GCROTA0E
DolphinC2_ENcopy_F_FM.book Page 30 Friday, February 25, 2005 10:46 AM