Ricoh 480W 操作指南
Programs
65
2
Programs
You can store frequently used copy
job settings in machine memory and
recall them for future use.
job settings in machine memory and
recall them for future use.
Note
❒ You can store up to 10 programs.
❒ You can select the standard mode or
❒ You can select the standard mode or
Program No.10 as the default mode
to be set when modes are cleared or
reset, or immediately after the oper-
ation switch is turned on. See p.85
“Change Initial Mode”.
to be set when modes are cleared or
reset, or immediately after the oper-
ation switch is turned on. See p.85
“Change Initial Mode”.
❒ Paper settings are stored based on
paper size. However, if you have
more than one paper tray contain-
ing the same size paper, the tray
prioritized with User Tools (Sys-
tem Settings) is selected first. See
“Paper Tray Priority” in “Tray Pa-
per Settings”, General Settings
Guide.
more than one paper tray contain-
ing the same size paper, the tray
prioritized with User Tools (Sys-
tem Settings) is selected first. See
“Paper Tray Priority” in “Tray Pa-
per Settings”, General Settings
Guide.
❒ Programs are not deleted by turn-
ing the power off or pressing the
{{{{Clear Modes}}}} key. They are can-
celed only when you delete or over-
write them with another program.
write them with another program.
Storing a Program
AAAA
Edit the copy settings so all func-
tions you want to store in this pro-
gram are selected.
tions you want to store in this pro-
gram are selected.
BBBB
Press the
{{{{Program}}}} key.
CCCC
Press [Register].
DDDD
Press the program number you
want to store.
want to store.
Note
❒ Program numbers displayed with
m next to them already have
settings.
settings.
Reference
p.66 “Changing a Stored Pro-
gram”
gram”
EEEE
Enter the program name using the
letter keys on the display panel.
You can enter up to 40 characters.
letter keys on the display panel.
You can enter up to 40 characters.
Reference
For details about entering char-
acters, see “Entering Text”, Gen-
eral Settings Guide.
acters, see “Entering Text”, Gen-
eral Settings Guide.
Note
❒ If you do not want to enter a
program name, proceed to step
F
.
FFFF
Press [OK].
When the settings are successfully
stored, the
When the settings are successfully
stored, the
m indicator followed
by the program number and pro-
gram name will be displayed. Af-
ter a while, the screen reverts back
to the initial copy display.
gram name will be displayed. Af-
ter a while, the screen reverts back
to the initial copy display.
AHD055S
DolphinC2_ENcopy_F_FM.book Page 65 Friday, February 25, 2005 10:46 AM