Ricoh 480W 网络指南
Connecting and Setting Up
10
2
Confirming the Connection
AAAA
Make sure the LED of the IEEE 802.11b
interface unit is lit.
interface unit is lit.
❖
❖
❖
❖ When using in infrastructure mode
1.
If [LAN Type] on the [Interface Set-
tings]
/[Network] screen is not set to
[IEEE 802.11b]
, it does not light, even
if the main power is on.
2.
If it is connected properly to the
network, the LED is green when in
infrastructure mode. If the LED is
blinking, the machine is searching
for devices.
infrastructure mode. If the LED is
blinking, the machine is searching
for devices.
❖
❖
❖
❖ When using in ad hoc mode/802.11
ad hoc mode
1.
If the IEEE 802.11b interface unit
is working, it is lit in orange.
2.
If it is connected properly to the
network, the LED is green when in
ad hoc mode or 802.11 ad hoc mode.
If the LED is blinking, the machine
is searching for devices. The LED
will light after a few seconds.
ad hoc mode or 802.11 ad hoc mode.
If the LED is blinking, the machine
is searching for devices. The LED
will light after a few seconds.
Checking the machine's radio wave status
When using in infrastructure mode,
you can check the machine's radio
wave status using the control panel.
you can check the machine's radio
wave status using the control panel.
Note
❒ To check the radio wave status,
press [IEEE 802.11b] under [LAN
Type]
Type]
on the [Network] screen.
AAAA
Press the
{{{{User Tools/Counter/Inquiry}}}}
key.
BBBB
Press [System Settings].
CCCC
Press [Interface Settings].
DDDD
Press [IEEE 802.11b].
EEEE
Press [Wireless LAN Signal].
The machine's radio wave status
appears.
The machine's radio wave status
appears.
FFFF
After checking radio wave status,
press [Exit].
press [Exit].
GGGG
Press the
{{{{User Tools/Counter/Inquiry}}}}
key to return to the User Tools /
Counter / Inquiry menu.
Counter / Inquiry menu.
ZZZ024S
1
2
2
ZZZ024S
1
2
2