Ricoh 480W 网络指南
![Ricoh](https://files.manualsbrain.com/attachments/5d75c15ccccf2674dc37d8acfe0fae2e288880f8/common/fit/150/50/7e2e9af8081fa1a72a9fce0a1dbc35e689c173f116f15720716c2ad6d183/brand_logo.png)
Setting Up the Machine on a Network
19
2
*1
Appears when the optional IEEE 1394 interface board is installed.
*2
Appears when the optional IEEE 802.11b interface unit is installed.
If Ethernet and IEEE 802.11b (wireless LAN) are both connected to the machine, the
If Ethernet and IEEE 802.11b (wireless LAN) are both connected to the machine, the
selected interface has priority.
*3
Check [Effective] is selected for TCP/IP.
Network Configuration
Any change you make with User
Tools remains in effect even if the
main power switch or operation
switch is turned off, or the
Tools remains in effect even if the
main power switch or operation
switch is turned off, or the
{{{{Energy
Saver
}}}} or {{{{Clear Modes}}}} key is pressed.
Configuring the network using the
control panel
control panel
Note
❒ Operations for System Settings are
different from normal operations.
After using User Tools, press the
After using User Tools, press the
{{{{User Tools/Counter/Inquiry}}}} key to
exit.
exit.
❒ When [User Authentication Manage-
ment]
is set, operations are not pos-
sible with the machine unless a
valid user name and password is
entered. For details about user au-
thentication, consult administrator.
valid user name and password is
entered. For details about user au-
thentication, consult administrator.
AAAA
Press the
{{{{User Tools/Counter/Inquiry}}}}
key.
Note
❒ The machine will be offline dur-
ing setting.
BBBB
Press [System Settings].
CCCC
Press [Interface Settings] or [File
Transfer]
Transfer]
.
DDDD
Select the required menu, and
then press the desired key.
then press the desired key.
EEEE
Change settings by following the
instructions on the display panel,
and then press [OK].
instructions on the display panel,
and then press [OK].
Note
❒ To cancel changes made to set-
tings and return to theSystem
Settings menu, press [Cancel].
Settings menu, press [Cancel].
FFFF
Press [Exit].
GGGG
Press the
{{{{User Tools/Counter/Inquiry}}}}
key.
Note
❒ You can also exit by pressing
[Exit]
on the User Tools main
menu.
IEEE 802.11b
(wireless LAN)
(wireless LAN)
Interface Settings/Network
Permit SNMP V3 Communication
❍
Permit SSL / TLS Communication
❍
Host Name
❍
Communication Mode
$
SSID Setting
❍
Channel
❍
WEP (Encryption) Setting
❍
Transmission Speed
❍
Interface
Settings