Ricoh 480W 网络指南
![Ricoh](https://files.manualsbrain.com/attachments/5d75c15ccccf2674dc37d8acfe0fae2e288880f8/common/fit/150/50/7e2e9af8081fa1a72a9fce0a1dbc35e689c173f116f15720716c2ad6d183/brand_logo.png)
Monitoring and Configuring the Machine
50
3
❖
❖
❖
❖ Initializing the machine name for
each interface
m s h > h o s t n a m e “ i n t e r -
face_name” clear name
face_name” clear name
ifconfig
Use the "ifconfig" command to con-
figure TCP/IP (IP address, subnet
mask, broadcast address, default
gateway address) for the machine.
figure TCP/IP (IP address, subnet
mask, broadcast address, default
gateway address) for the machine.
❖
❖
❖
❖ View settings
msh> ifconfig
❖
❖
❖
❖ Configuration
msh> ifconfig “interface_
name” “parameter” “address”
name” “parameter” “address”
• If you did not enter an interface
name, it is automatically set to
the Ethernet interface.
the Ethernet interface.
• ip1394 can be specified only
when the IEEE 1394 interface is
installed.
installed.
• wlan can be specified only
when the IEEE 802.11b interface
is installed.
is installed.
❖
❖
❖
❖ Netmask configuration
msh> ifconfig “interface
_name” netmask “address”
_name” netmask “address”
❖
❖
❖
❖ Broadcast address configuration
msh> ifconfig “interface_
name” broadcast “address”
name” broadcast “address”
❖
❖
❖
❖ Changing the Interface
msh> ifconfig “interface”
up
up
• You can specify either the Eth-
ernet interface or IEEE 802.11b
interface when using the op-
tional IEEE 802.11b interface
unit.
You cannot specify the IEEE
1394 interface.
interface when using the op-
tional IEEE 802.11b interface
unit.
You cannot specify the IEEE
1394 interface.
The following explains how to
configure an IP address 192.168.15.
16 on Ethernet interface.
configure an IP address 192.168.15.
16 on Ethernet interface.
msh> ifconfig ether 192.
168.15.16
The following explains how to
configure a subnet mask 255.255.
255.0 on Ethernet interface.
168.15.16
The following explains how to
configure a subnet mask 255.255.
255.0 on Ethernet interface.
msh> ifconfig ether net-
mask 255.255.255.0
mask 255.255.255.0
Note
❒ To get the above addresses, contact
your network administrator.
❒ Use the default configuration if you
cannot obtain setting addresses.
❒ The IP address, subnet mask and
broadcast address are the same as
that for the ethernet interface and
IEEE 802.11b interface.
that for the ethernet interface and
IEEE 802.11b interface.
❒ When installing the optional 1394
Interface board, set the IP address
and subnet mask so that it does not
overlap with the ethernet interface
or the IEEE 1394 interface.
and subnet mask so that it does not
overlap with the ethernet interface
or the IEEE 1394 interface.
❒ TCP/IP configuration is the same
for both Ethernet and IEEE 802.11b
interface. If interfaces are changed,
the new interface inherits the con-
figuration.
interface. If interfaces are changed,
the new interface inherits the con-
figuration.
❒ Use "0x" as the initial two letters of
a hexadecimal address.
passwd
Use the “passwd” command to
change the remote maintenance pass-
word.
change the remote maintenance pass-
word.
Interface name
Interface configured
ether
Ethernet Interface
ip1394
IEEE 1394 Interface
wlan
IEEE 802.11b Interface