Ricoh 480W 网络指南
![Ricoh](https://files.manualsbrain.com/attachments/5d75c15ccccf2674dc37d8acfe0fae2e288880f8/common/fit/150/50/7e2e9af8081fa1a72a9fce0a1dbc35e689c173f116f15720716c2ad6d183/brand_logo.png)
Remote Maintenance by telnet
53
3
❖
❖
❖
❖ Deleting Comment
msh> smb clear comment
❖
❖
❖
❖ Protocol settings
msh> smb protocol [netbeui
{up | down} | tcpip {up |
down}]
{up | down} | tcpip {up |
down}]
• Enable or disable NetBEUI and
TCP/IP. Specify “up” to enable,
and “down” to disable.
and “down” to disable.
snmp
Use the “snmp” command to display
and edit SNMP configuration settings
such as the community name.
and edit SNMP configuration settings
such as the community name.
❖
❖
❖
❖ View settings
msh> snmp
• Default access settings 1 is as
follows:
Community name:public
IP address:0.0.0.0
Access type:read-only / trap off
Community name:public
IP address:0.0.0.0
Access type:read-only / trap off
• Default access settings 2 is as
follows:
Community name:admin
IP address:0.0.0.0
Access type:read-write / trap off
Community name:admin
IP address:0.0.0.0
Access type:read-write / trap off
• If "-p" is added, you can view
settings one by one.
• To display the current commu-
nity, specify its registration
number.
number.
❖
❖
❖
❖ Display
msh> snmp ?
❖
❖
❖
❖ Community name configuration
msh> snmp “number” name
“community_name”
“community_name”
• You can configure ten SNMP
access settings numbered 1-10.
• The community name can be
entered using up to 15 charac-
ters.
ters.
❖
❖
❖
❖ Deleting community name
msh> snmp “number” clear
name
name
❖
❖
❖
❖ Access type configuration
msh> snmp “number” type
“access_type”
“access_type”
❖
❖
❖
❖ Protocol configuration
msh> snmp {ip | ipx} {on |
off}
off}
• Use the following command to
set protocols "active" or "inac-
tive": If you set a protocol "inac-
tive", all access settings for that
protocol are disabled.
tive": If you set a protocol "inac-
tive", all access settings for that
protocol are disabled.
• Specify "ip" for TCP/IP, or "ipx"
for IPX/SPX.
• {on} means "active" and {off}
means "inactive".
• IEEE 1394 interface is available
for TCP/IP only.
❖
❖
❖
❖ Configuration of protocol for each
registration number
msh> snmp “number” active
{ip | ipx} {on | off}
{ip | ipx} {on | off}
• To change the protocol of access
settings, use the following com-
mand. However, if you have
disabled a protocol with the
above command, activating it
here has no effect.
mand. However, if you have
disabled a protocol with the
above command, activating it
here has no effect.
Access type
Type of access per-
mission
mission
no
not accessible
read
read only
write
read and write
trap
user is notified of trap
messages
messages