Ricoh 480W 网络指南
Monitoring and Configuring the Machine
64
3
Message List
This is a list of messages that appear in the machine's system log. The system log
can be viewed using the "syslog" command.
can be viewed using the "syslog" command.
System Log Information
Use the following command to display the system log information:
• UNIX: Use the "syslog" command and "rsh", "rcp", and "ftp" parameters.
• telnet : Use the “syslog” command.
• UNIX: Use the "syslog" command and "rsh", "rcp", and "ftp" parameters.
• telnet : Use the “syslog” command.
Message
Problem and solutions
ANONYMOUS FTP LOGIN FROM <IP ad-
dress>, <password>
dress>, <password>
An anonymous login has been made with a
password <password> from the host <IP ad-
dress>.
password <password> from the host <IP ad-
dress>.
Change IP address from DHCP Server.
The IP address changes when DHCP lease is re-
newed. To always assign the same IP address,
set a static IP address to the DHCP server.
newed. To always assign the same IP address,
set a static IP address to the DHCP server.
child process exec error! (process name)
The network service failed to start. Turn the
printer off and then on. If this does not work,
contact your service or sales representative.
printer off and then on. If this does not work,
contact your service or sales representative.
Connected DHCP Server(<DHCP server ad-
dress>).
dress>).
The IP address was successfully received from
the DHCP server.
the DHCP server.
connection from <IP address>
Login was from the host IP address.
Current Interface Speed:xxxMbps
Speed of the network (10 Mbps or 100 Mbps)
Current IP address <current IP address>
The IP address <current IP address> was re-
ceived from the dhcp server.
ceived from the dhcp server.
DHCP lease time expired.
DHCP lease time has expired. The printer tries
to discover the DHCP server again. The IP ad-
dress until now becomes invalid.
to discover the DHCP server again. The IP ad-
dress until now becomes invalid.
DHCP server not found.
The DHCP server was not found. Make sure
that the DHCP is on the network.
that the DHCP is on the network.
dhcpcd start.
The DHCPCD service (dhcp client service) has
started.
started.
Duplicate IP=<IP address>(from <MAC ad-
dress>).
dress>).
The same IP address is used. Each IP address
must be unique. Check the address of the de-
vice indicated in [MAC address].
must be unique. Check the address of the de-
vice indicated in [MAC address].
httpd start.
The httpd service has started.
inetd start.
The inetd service has started.
LeaseTime=<lease time>(sec), Renew-
Time=<renew time>(sec).
Time=<renew time>(sec).
The resource lease time received from the
DHCP server is displayed in [lease time] in
seconds. The renewal time is displayed in [re-
new time] in seconds.
DHCP server is displayed in [lease time] in
seconds. The renewal time is displayed in [re-
new time] in seconds.