Ricoh ap2600 用户指南

Paper and Other Media

34

Paper should always be stored properly. Improperly stored paper might result
in poor print quality, paper misfeeds or printer damage.
Recommendations are as follows:
• Avoid storing paper in humid areas.
• Avoid exposing paper to direct sunlight.
• Store on a flat surface.
• Keep open reams of paper in the package in which the paper came.

❖

❖

❖

❖ Plain paper

• If you print on paper heavier than 155 g/m

2

 (41 lb), use the bypass tray.

The bypass tray can hold paper up to 162 g/m

2

 (43 lb) in weight.

• If you load paper heavier than 155 g/m

2

 (41 lb) onto the bypass tray, set

the printer to Thick Paper mode using the operation panel. 

• If paper is curled or bent, correct it before loading.

❖

❖

❖

❖ OHP transparencies

• Load only one OHP transparency at the same time onto the bypass tray.
• When loading an OHP transparency onto the bypass tray, set the printer

to Transparency mode with the operation panel. 

• Be careful not to touch the print side of the OHP transparencies, otherwise

the print side gets dirty or damaged, and results in poor print quality.

• When printing on an OHP transparency that has a print side, load it facing

down onto the bypass tray.

❖

❖

❖

❖ Adhesive labels

• Load only one adhesive label at the same time onto the bypass tray.
• Use adhesive labels in which the whole side can be printed on.
• Do not use adhesive labels having exposed glue.
• If the print side is coated, print quality might be reduced, as the toner

might not fuse well.