Ricoh ap2600 用户指南
Paper and Other Media
44
3
D
Load paper into the paper tray
with the print side down.
with the print side down.
Important
❒ Confirm that the top of the stack
is not higher than the limit mark
inside the tray.
inside the tray.
❒ Confirm that paper fits under
the rear guide.
E
While lifting the front of the tray,
place the tray into the printer.
Then slide it inside until it stops.
place the tray into the printer.
Then slide it inside until it stops.
Important
❒ Do not slide the paper tray in
with force. If you do, the front
and side guides might move.
and side guides might move.
Loading Envelopes
As there are many kinds of envelopes,
be sure to check if those to be used are
supported by this printer.
be sure to check if those to be used are
supported by this printer.
Important
❒ Even when the optional Envelope
Feeder Unit is not installed, you
can select the sizes for the enve-
lopes for Tray 2 using the opera-
tion panel. However, you cannot
load the envelopes until the op-
tional Envelope Feeder Unit is in-
stalled.
can select the sizes for the enve-
lopes for Tray 2 using the opera-
tion panel. However, you cannot
load the envelopes until the op-
tional Envelope Feeder Unit is in-
stalled.
❒ To install the Envelope Feeder
Unit, the optional Paper Feed Unit
must be installed. See “Installing
Envelope Feeder Type 2600” in the
Setup Guide.
must be installed. See “Installing
Envelope Feeder Type 2600” in the
Setup Guide.
Loading envelopes onto the bypass tray
Reference
With the bypass tray, you can load
up to 10 envelopes at the same
time. For more information about
envelopes, see P.34 “Types of Paper
and Other Media”.
With the bypass tray, you can load
up to 10 envelopes at the same
time. For more information about
envelopes, see P.34 “Types of Paper
and Other Media”.
A
Open the bypass tray.