Ricoh ap2600 用户指南

Making Printer Settings with the Operation Panel

120

There are three menu items in the “Host Interface” menu.
• I/O Buffer
• I/O Timeout
• Network Setup

❒ The  “Network Setup” appears only when the optional Network Interface

Board is installed. For more information about the “Network Setup”, see “Con-
figuring the power for the Network with the Operation Panel” in the “Setup Guide”.

I/O Buffer

You can set the size of the I/O Buffer. Normally it is not necessary 
to change this setting.

16 KB, 32 KB, 64 KB, 128 KB, 256 KB, 512 KB

❒ Default: 32 KB

I/O Timeout

You can set how many seconds the printer should wait before 
ending a print job. If data from other port often appears in the 
middle of the print job, you should increase the timeout value.

10 seconds, 15 seconds, 20 seconds, 25 seconds, 60 seconds

❒ Default: 15 seconds

Network Setup

❖

❖

❖

❖ IP Address

You can set the IP Address.

❒ Default: 011.022.033.044

See “Configuring the Printer for the Network with the Opera-
tion Panel”

 in the Setup Guide.

❖

❖

❖

❖ Subnet Mask

You can set the Subnet Mask.

❒ Default: All zero

See “Configuring the Printer for the Network with the Opera-
tion Panel”

 in the Setup Guide.