Ricoh ap2600 用户指南
Installing Options
15
2
Installing Options
Installing Paper Feed Unit
Type 2600
Type 2600
Important
❒ Do not slide more than one paper
tray out at the same time. Having
more than one paper tray filled
with paper in a fully extended po-
sition could cause the machine to
fall down.
more than one paper tray filled
with paper in a fully extended po-
sition could cause the machine to
fall down.
❒ Do not install more than two Paper
Feed Units in your printer at the
same time.
same time.
❒ Check the printer nameplate to
confirm the model code.
A
Check the contents of the box for
the following items:
• Paper Feed Unit (including a
the following items:
• Paper Feed Unit (including a
paper tray)
• Installation Guide
B
Be sure to check the following
points:
• The power switch is turned off.
• The power cord is unplugged
points:
• The power switch is turned off.
• The power cord is unplugged
from the wall outlet.
• The interface cable is un-
plugged from the printer.
C
Remove the adhesive tape from
the Paper Feed Unit.
the Paper Feed Unit.
Note
❒ If you install two Paper Feed
Units at the same time, stack
them up in advance.
them up in advance.
D
There are three pins on the top of
the Paper Feed Unit that point
straight up. On the bottom of the
printer there are three holes.
Align the holes over the pins and
lower the printer gently onto the
Paper Feed Unit.
the Paper Feed Unit that point
straight up. On the bottom of the
printer there are three holes.
Align the holes over the pins and
lower the printer gently onto the
Paper Feed Unit.
R
CAUTION:
• When lifting the machine, use
the inset grips on both sides.
Otherwise the printer could
break or cause injury if
dropped.
Otherwise the printer could
break or cause injury if
dropped.
Zcex390j.eps
Zcex400j.eps