Ricoh ap2600 用户指南
NetWare Configuration
68
4
Setting Up a Client Computer
This section describes how to set up a client computer when using a NetWare
print server.
print server.
Note
❒ This section assumes that the client has NetWare client applications installed
and is correctly configured to communicate with a NetWare print server. If
not, install the necessary applications before starting the setting up proce-
dure.
not, install the necessary applications before starting the setting up proce-
dure.
Windows 95/98/Me
Follow the procedure to set up a Windows 95/98/Me client.
Preparation
Log on to the NetWare file server before starting the following procedure.
Log on to the NetWare file server before starting the following procedure.
A
Install the printer driver you want to use as “Local printer”.
Reference
For more information about installing the printer driver, see the "Setup
Guide" that comes with the printer.
For more information about installing the printer driver, see the "Setup
Guide" that comes with the printer.
Note
❒ Any port can be selected during the installation, however, LPT1 is recom-
mended.
B
Click [Start], point to [Settings], and then click [Printers].
C
In the [Printers] window, click the icon of the printer you want to use.
D
On the [File] menu, click [Properties].
E
Click the [Details] tab, and click [Add Port].
F
Click [Network] and click [Browse].
G
On the network tree, double-click the name of the file server.
The queues are displayed.
The queues are displayed.
H
Click the queue you want to print, and click [OK].
I
Click [OK].
In the [Print to the following port] box, a network path to the printer appears.
In the [Print to the following port] box, a network path to the printer appears.
J
Click [OK] to close the Printer Properties, and again, open it.