Ricoh ap2600 用户指南

Installing Options

Plug the printer's power cord
back into the wall outlet and turn
on the power switch.

Print a configuration page to con-
firm that the Memory Unit is
properly installed.

Important

❒ If you use a Windows operating

system, you should set up the
Memory Unit with the printer
driver to make the printer recog-
nizes the installation. See a de-
scription of Windows 95/98/Me,
Windows 2000 and Windows NT
4.0 on P.43 “Installing the Printer
Driver and Software”.

Note

❒ After installing the last option that

you want, print a configuration
page to confirm the installation. If
the new device is listed in the col-
umn of configuration options, then
it has been properly installed. For
more information about printing a
configuration page, see "Printing a
Configuration Page" in the Printer
Reference provided as a PDF file
on the CD-ROM labeled "Operat-
ing Instructions".

Installing Hard Disk Drive Type
2600

Important

❒ The Hard Disk Drive can be dam-

aged by small amount of static
electricity. You should touch some
metal to discharge static electricity.

Check the contents of the box for
the following items:
• Hard Disk Drive
• Installation Guide

Be sure to check the following
points:
• The power switch is turned off.
• The power cord is unplugged

from the wall outlet.

• The interface cable is un-

plugged from the printer.

Use a coin to remove the two
screws, and then remove the cov-
er.

Note

❒ The screws and cover are not

need when installing the Hard
Disk Drive.

ZCEX350J.eps