Ricoh ap2600 用户指南
Precautions
97
6
When Using DHCP
Note the following points when using DHCP (Dynamic Host Configuration Pro-
tocol).
tocol).
Supported systems
Windows NT Server 4.0 can be configured as a DHCP server.
Configure the printer with a reserved IP address
To always assign the same IP address, configure a reserved IP address using the
DHCP server.
DHCP server.
Note
❒ When multiple DHCP servers are used, reserve the same address with each
DHCP server. The Network Interface Board needs to receive information
from the DHCP server that it contacts.
from the DHCP server that it contacts.
Follow these steps to configure the printer with a reserved IP address.
A
Start the DHCP manager.
B
Select the scope that will be used, and on the [Scope] menu, click [Reserva-
tion]
tion]
.
C
Type the IP address into [IP Address].
D
Type the MAC address of the Network Interface Board into [Unique Identifi-
er]
er]
.
Note
❒ Do not use hyphens to separate the numbers.
❒ If you do not know the MAC address, it can be found on the configuration
❒ If you do not know the MAC address, it can be found on the configuration
page printed by the printer.
E
Type a name and comment into the [Client Name] box and the [Client Comment]
box.
box.
Note
❒ For more information about client names, see P.98 “Additional information”.
F
Click [Add].
An IP address is reserved.
An IP address is reserved.
G
Click [Close] to close the dialog box.