Ricoh ap2600 用户指南

Installing Options

Press {

{

{Enter q

}

Important

❒ Do not turn off the printer while

formatting the Hard Disk Drive.
Turning off the printer while
formatting the Hard Disk Drive
can damage the Hard Disk
Drive.

If you successfully format the
Hard Disk Drive, the following
message appears on the panel dis-
play.

Format Completed

Restart Printer

Note

❒ If you fail, see “Troubleshooting”

in the Printer Reference provid-
ed as a PDF file on the CD-ROM
labeled "Operating Instruc-
tions".

Turn off the power switch, and
then turn it back on.

Installing Network Interface
Board Type 2600

Note

❒ See the inside front cover of this

manual to confirm which printer
(Type 1 or Type 2) you have.

❒ The Network Interface Board and

the 1394 Interface Unit cannot be
installed to the printer at the same
time.

Important

❒ The Network Interface Board can

be damaged by small amount of
static electricity. You should touch
some metal to discharge static elec-
tricity.

❒ Use the shielded twisted-pair

(STP) network interface cable.

Installing the Network Interface Board

Check the contents of the box for
the following items:
• Network Interface Board
• Ferrite Core
• Installation Guide

Be sure to check the following
points:
• The power switch is turned off.
• The power cord is unplugged

from the wall outlet.

• The interface cable is un-

plugged from the printer.

Note

❒ The interface cable is not includ-

ed in the box. Make sure that the
interface cable you use, is ap-
propriate for your computer.

❒ If the Duplex Unit is not in-

stalled, go to step