Ricoh ap2600 用户指南
![Ricoh](https://files.manualsbrain.com/attachments/5d75c15ccccf2674dc37d8acfe0fae2e288880f8/common/fit/150/50/7e2e9af8081fa1a72a9fce0a1dbc35e689c173f116f15720716c2ad6d183/brand_logo.png)
UNIX Configuration
8
1
Solaris
❖
❖
❖
❖ Adding the IP address and host name to the /etc/hosts file
The following line is added to the /etc/hosts file.
192.168.15.16 nphost # Network Printer
192.168.15.16 nphost # Network Printer
• 192.168.15.16 is the IP address, nphost is the host name, from # to the end
of the line is a comment.
Note
❒ The /etc/hosts file contains a list of the IP addresses and their host names
of all of the hosts communicating on the network. Each entry is delimited
with a space or a tab, and each line is separated with a return.
with a space or a tab, and each line is separated with a return.
❒ If you do not use NIS or DNS, you must manually enter the IP address and host
name of each workstation using the network printer in the /etc/hosts file.
❖
❖
❖
❖ Registering the printer
The installation shell script registers the printer as a remote printer.
A
If your workstation is Solaris 2.5.1, register the print server and print client
to the print service.
to the print service.
# lpsystem -t bsd -R 0 -y
″″″″Network Printer″″″″ nphost
B
Register the printer as a remote printer.
# lpadmin -p np -s nphost!option -T dump -I any
• np is the printer name, nphost is the host name. For more information
about option, see P.15 “Specifying the Device Option”.
C
If your workstation is Solaris 2.5.1, set the print job enable to be accepted
by print queue.
by print queue.
/usr/lib/accept np
D
If your workstation is Solaris 2.5.1, set the print job enable to print.
/usr/lib/enable np