Ricoh ap1400 用户手册
Replacing the Friction Pad
7
2
Replacing the Friction Pad
Replace the friction pad of the stan-
dard tray (tray 1). It is not necessary
to replace the friction pad of the op-
tional paper tray(s).
dard tray (tray 1). It is not necessary
to replace the friction pad of the op-
tional paper tray(s).
R
CAUTION:
A
Pull the tray out of the printer.
B
Remove paper from the paper
tray. Turn the tray upside down
and place it on a flat surface.
tray. Turn the tray upside down
and place it on a flat surface.
C
Release the two black catches,
that lock the friction pad, using a
that lock the friction pad, using a
sharp-pointed item such as a ball-
point pen.
point pen.
D
Turn the paper tray to the original
position, and remove the friction
pad from the tray.
position, and remove the friction
pad from the tray.
E
Insert the new friction pad in the
paper tray. When inserting, note
the following:
A The three triangular projec-
paper tray. When inserting, note
the following:
A The three triangular projec-
tions should be facing toward
the front side of the tray as
shown in the illustration.
the front side of the tray as
shown in the illustration.
B Align the center projection of
the new friction pad to the
spring of the paper tray.
spring of the paper tray.
C Also, align the projections of
both sides of the friction pad to
• The paper tray does not have a
stopper. When pulling it out, be
careful not to pull it strongly. If
you do, the tray might fall and
cause personal injury.
careful not to pull it strongly. If
you do, the tray might fall and
cause personal injury.
TS4M080E
TS4M090E
TS4M101E
TS4M111E