Ricoh ap1400 用户手册
Configuring the Printer for the Network with the Operation Panel
26
3
Setting Up the IP Parameters
After installing the optional network
interface board, configure it for the
network using the printer's operation
panel.
interface board, configure it for the
network using the printer's operation
panel.
Reference
A
Press
{
Menu
}.
The following message appears on
the panel display.
the panel display.
Main Menu: j
Job Control l
B
Press
{T}{U} until the following
message appears.
Main Menu: j
Host Interfacel
C
Press
{
Enter
}.
The following message appears on
the panel display.
the panel display.
Host Interface:j
1.Printer Lang.l
D
Press
{T}{U} until the following
message appears.
Host Interface:j
1.Network Setupl
E
Press
{
Enter
}.
The following message appears on
the panel display.
the panel display.
Network Setup: j
1.IP Address l
F
Press
{
Enter
}.
The current IP address appears on
the panel display. A pointer (k)
blinks on the value to be specified.
the panel display. A pointer (k)
blinks on the value to be specified.
IP Address: jld#
000.000.000.000
G
Specify the first (leftmost) 3 digits
of the IP address using
of the IP address using
{U} {T}.
Use
{U} to increase a value, and
{T} to decrease.
IP Address: jld#
100.000.000.000
H
Press
{
Enter
}.
A pointer (k) moves to the second
3 digits.
3 digits.
Note
❒ Before pressing
{
Enter
}, you can
return the pointer (k) to the pre-
vious (left) 3 digits by pressing
vious (left) 3 digits by pressing
{
Escape
}.
❒ If you press
{
Escape
} when the
pointer (k) is on the leftmost 3
digits, the specified IP address
is canceled and you can return
to the previous panel display.
digits, the specified IP address
is canceled and you can return
to the previous panel display.
I
Repeat steps
G and H to specify
the rest of the digits of the IP ad-
dress.
dress.
J
Check if the pointer (k) is at the
rightmost digit, press
rightmost digit, press
{
Enter
} to