Ricoh ap1400 用户手册

Paper and Other Media Supported by Your Printer

75

❖

❖

❖

❖

• Load only one OHP transparency at a time onto the bypass tray.
• When loading OHP transparencies onto the bypass tray, set the printer to

the Thick Paper mode using the operation panel. 

• Be careful not to touch the print side of the OHP transparencies. Other-

wise, the print side gets dirty or damaged, and results in poor print quality.

• When printing on an OHP transparency that has a print side, load it face

down onto the bypass tray.

❖

❖

❖

❖

• Load only one translucent paper at a time onto the bypass tray.
• When printing on translucent paper that has a print side, load it face down

onto the bypass tray.

❖

❖

❖

❖

• Load only one adhesive label at a time onto the bypass tray.
• Use adhesive labels in which the whole side can be printed on.
• Avoid using adhesive labels having exposed glue.
• If the print side is coated, the print quality might be reduced, as the toner

might not fuse well.

❖

❖

❖

❖

• When printing on envelopes, use the bypass tray or the optional envelope

feeder.

• Even when the optional envelope feeder is not installed, you can specify

the sizes for the envelopes for tray 2 using the operation panel. However,
the envelopes cannot be loaded into tray 2 without the envelope feeder.
To use the envelope feeder, the installation of the optional paper unit is re-
quired.

“Type 2 Printer: Installing the Envelope Feeder Type 1400”.

• Specification of envelopes are as follows:

• For the Type 1 printer, you can load up to 10 envelopes (72 – 90 g/m

2

, 19 –

24 lb) onto the bypass tray at a time, without forcibly pressing them. How-
ever, make sure that the envelopes are not damp, and that the top of the
stack is not higher than the limit mark on the side guide. 

Metric version

Inch version

Weight

72 – 90 g/m

2

19 – 24 lb

Recommended weight 
and size

72 g/m

2

, 114 

×

 162 mm

(C6 Env)

24 lb, 3

7

/

8

" 

×

 7

1

/

2

"

(Monarch)