Ricoh AP400 用户指南
Appendix
100
7
Confirming the Connection
AAAA
Make sure the LED of the IEEE
802.11b card is lit.
802.11b card is lit.
❖
❖
❖
❖ When using in Infrastracture Mode
1.
If the IEEE 802.11b card is work-
ing, it is lit in orange. If the IEEE
802.11b (wireless LAN) is not select-
ed, it does not light, even if the print-
er power is on.
802.11b (wireless LAN) is not select-
ed, it does not light, even if the print-
er power is on.
2.
If it is connected properly to a net-
work, the LED is green in infrastruc-
t u r e m o d e . W h e n t h e L E D i s
blinking, the machine is searching
for devices.
t u r e m o d e . W h e n t h e L E D i s
blinking, the machine is searching
for devices.
❖
❖
❖
❖ When using in Ad hoc Mode/802.11
Ad hoc Mode
1.
If the IEEE 802.11b card is work-
ing, it is lit in orange.
2.
If it is connected properly to a net-
work, the LED is green in ad hoc
mode or 802.11 ad hoc mode. When
the LED is blinking, the machine is
searching for devices. The LED will
light after a few seconds.
mode or 802.11 ad hoc mode. When
the LED is blinking, the machine is
searching for devices. The LED will
light after a few seconds.
BBBB
Use a Web Browser to check the
printer is connected properly. See
p.87 “Configuring the Network
I n t e r f a c e B o a r d w it h a W e b
Browser”.
printer is connected properly. See
p.87 “Configuring the Network
I n t e r f a c e B o a r d w it h a W e b
Browser”.
CCCC
Print the configuration page to
verify settings.
For more information about how
to print the configuration page, see
the Printer Reference.
verify settings.
For more information about how
to print the configuration page, see
the Printer Reference.
Infrastracture Mode
You can check the machine's radio
wave status using the machine's con-
trol panel.
wave status using the machine's con-
trol panel.
AAAA
Press the
{{{{Menu}}}} key.
“Menu” appears on the panel dis-
play.
play.
BBBB
Press
{{{{T
T
T
T}}}} or {{{{U
U
U
U}}}} to display the
“Maintenance” menu.
CCCC
Press
{{{{Enter #}}}}.
The following message appears on
the panel display.
the panel display.
DDDD
4 Press
{{{{T
T
T
T}}}} or {{{{U
U
U
U}}}} to display
"WL.LAN Signal".
EEEE
Press
{{{{Enter #}}}}.
One of the following messages ap-
pears on the panel display.
The machine's radio wave status is
displayed.
pears on the panel display.
The machine's radio wave status is
displayed.
FFFF
Press
{{{{Escape}}}}.
“Ready” appears on the panel dis-
play.
play.
ZGDH600J
1
2
2
ZGDH600J
1
2
2