Ricoh AP400 用户指南
Appendix
112
7
Direct Printing Port
The direct printing port allows printing directly from a computer, connected to
the network, to the printer.
Use the diprint command to change the direct printing port settings.
the network, to the printer.
Use the diprint command to change the direct printing port settings.
❖
❖
❖
❖ View settings
The following command displays the current direct printing port settings.
msh> diprint
Example output:
Example output:
port 9100
timeout=300(sec)
bidirect off
timeout=300(sec)
bidirect off
• The “Port” specifies the port number of the direct printing port.
• The “bidirect” setting indicates whether the direct printing port is bidirec-
• The “bidirect” setting indicates whether the direct printing port is bidirec-
tional.
❖
❖
❖
❖ Setting timeout
You can specify the timeout interval to use when receiving data from the net-
work.
work.
msh> diprint [0~65535]
Note
❒ The factory default is 300 seconds.
❒ If 0 is set, timeout is disabled.
❒ If 0 is set, timeout is disabled.
❖
❖
❖
❖ Bidirectional configuration for the direct printing port
Use this setting to configure whether the direct printing port is bidirectional.
The factory default is “off”.
The factory default is “off”.
msh> diprint bidirect {on|off}
Note
❒ If you select “on”, SmartNetMonitor for Client or Standard TCP/IP on
Windows 2000 might not work correctly.