Ricoh AP400 用户指南
37
3. Windows XP/Server 2003
Configuration
Configuring Windows XP/Server 2003
Printing without a Print Server
The following procedure describes how to configure Windows XP/Server 2003
to use the machine on a network without a Windows 2000 Server, Windows 2000
Professional, Windows XP/Server 2003, Windows NT Server, Windows NT
Workstation or NetWare based print server.
to use the machine on a network without a Windows 2000 Server, Windows 2000
Professional, Windows XP/Server 2003, Windows NT Server, Windows NT
Workstation or NetWare based print server.
AAAA
Specify the protocol to use
Consult your network administrator about which of the three protocols is ap-
propriate.
• TCP/IP
• IPP
Consult your network administrator about which of the three protocols is ap-
propriate.
• TCP/IP
• IPP
BBBB
Configure the protocol.
• See p.39 “Configuring TCP/IP and IPP for Printing”.
• See p.39 “Configuring TCP/IP and IPP for Printing”.
CCCC
Install the software and set the printer driver port
• Install SmartNetMonitor for Client from the CD-ROM labeled "Printer
• Install SmartNetMonitor for Client from the CD-ROM labeled "Printer
Drivers and Utilities". For more information about how to install the soft-
ware and how to specify the printer driver port, see the Setup Guide.
ware and how to specify the printer driver port, see the Setup Guide.
Printing with a Standard TCP/IP Port
Standard TCP/IP port is a standard port of Windows XP/Server 2003 to enable
Peer-to-Peer printing in a network environment.
For more information about Standard TCP/IP port settings, see Windows
XP/Server 2003 Help.
Peer-to-Peer printing in a network environment.
For more information about Standard TCP/IP port settings, see Windows
XP/Server 2003 Help.
Note
❒ If a device model selection dialog box appears during the procedure to add
the standard TCP/IP port, select "RICOH Network Printer C Model".