Ricoh AP400 用户指南
Setting Up a Client Computer
47
3
Setting Up a Client Computer
This section describes the procedures for setting up a client in a network that
uses Windows 2000, Windows XP/Server 2003, Windows NT Server or Win-
dows NT Workstation as a print server.
When using a Windows 2000, Windows XP/Server 2003 or Windows NT print
server, select a shared printer on Windows 2000, Windows XP/Server 2003 or
Windows NT.
uses Windows 2000, Windows XP/Server 2003, Windows NT Server or Win-
dows NT Workstation as a print server.
When using a Windows 2000, Windows XP/Server 2003 or Windows NT print
server, select a shared printer on Windows 2000, Windows XP/Server 2003 or
Windows NT.
Limitation
❒ When using a print server connected to the printer with SmartNetMonitor for
Client, you cannot use Recovery Printing and Parallel Printing.
Note
❒ This section assumes that the client has already been configured to communi-
cate with a Windows 2000, Windows XP/Server 2003 or Windows NT print
server. Do not begin the following procedure until the client has been set up
and configured correctly.
server. Do not begin the following procedure until the client has been set up
and configured correctly.
Use the [Printers] window to set up the printer.
AAAA
Access the [Printers and Faxes] window from [Start] on the taskbar.
BBBB
Click [Add Printer] in the Printer Tasks category.
This launches the Add Printer Wizard.
This launches the Add Printer Wizard.
CCCC
Click [Next >].
DDDD
Click [A network printer, or a printer attached to another computer.], and then click
[Next >]
[Next >]
.
EEEE
Click [Next >].
Windows XP/Server 2003
Windows 2000,
Windows XP/Server 2003 or
Windows NT 4.0 Print Server
Windows XP/Server 2003 or
Windows NT 4.0 Print Server