Ricoh cl3500n 软件指南

Making Printer Settings Using the Control Panel

134

❒ The signal is rated [Good] if signal strength is 86%-100%, [Fair] if 61%-85%,

[Poor] if 31%-60%, and [Unavailable] if 0%-30%. If the signal is unstable or
unavailable, remove any obstructions or move the printer to a place to re-
ceive the signal.

❒ Using wireless devices or microwave sources nearby will affect the signal

transmission.

Follow the procedure below to reset the wireless LAN setting on the [Maintenance]
menu.

❒ [Comm. Mode], [Channel], [Trans. Speed], [WEP Setting], and [SSID] can be select-

ed on the [Host Interface] menu.

A

Press the {Menu} key.

The [Menu] screen appears.

B

Press the {T} or {U} key to display [Maintenance], and then press the {#
Enter} key.

C

Press the {T} or {U} key to display [WL.LAN Defaults], and then press the
{# Enter} key.

D

Press the {# Enter} key.

The wireless LAN setting is reset.

After about three seconds, the initial screen appears.

This section explains about parameters that can be set on the Maintenance
menu.

❖ Color Regist.

You can specify Auto Adjust or Fuser Adjust for this feature.