Ricoh cl7000 操作指南
Operating Instructions
Administrator Reference
108
2.
Menu buttons
Use to configure the network interface board and
confirm printer status.
confirm printer status.
Note
❒
When you click [
Network Config
], a dialog
box appears requesting the user name and
password. Enter only the password in this
dialog box. The factory default password is
“password”.
password. Enter only the password in this
dialog box. The factory default password is
“password”.
❒
The password is the same as that used for
remote maintenance and NIB Setup Tool. If
you change a password with the Web
b r o w s e r , o t h e r p a s s w o r d s a r e a l s o
changed.
remote maintenance and NIB Setup Tool. If
you change a password with the Web
b r o w s e r , o t h e r p a s s w o r d s a r e a l s o
changed.
3.
Status
Displays printer status, and network interface
board, name and comments.
board, name and comments.
Configuring the Network Interface Board Settings
AAAA
Start the Web browser.
BBBB
Point your browser at the URL or IP address of the printer (e.g. http://XXX.XXX.XXX.XXX
where the Xs are the number of the IP address).
where the Xs are the number of the IP address).
The status of the chosen printer appears on the Web browser.
CCCC
Click
[
Configuration
]
.
The dialog box for entering the password and user name is displayed.
DDDD
Enter your user name and password, and then click
[
OK
]
.
To use the factory default account, enter no user name and enter “password” for the password.