Ricoh cl7000 操作指南

❒

If you prohibit remote access using TCP/IP and then log out, you cannot use remote access. If this
was a mistake, you can use the control panel to allow access by TCP/IP.

❒

When you prevent access via TCP/IP, you are also prevented from using “ip1394”, “lpr”, “ftp”, “rsh”,
“diprint”, “web”, “snmp”, and “ipp”.

Use the “set” command to configure the boot method:

msh> set dhcp {on|off}

(“on” means active and “off” means inactive.)

❒

The default is “on”.

❒

When you are using DHCP, the server also needs to be configured.

❒

DHCP takes precedence over all other settings.

dhcp

DHCP (Dynamic Host Configuration Pro-
tocol)