Ricoh cl7000 操作指南
Operating Instructions
Administrator Reference
204
SNMP
Use the “snmp” command to display and edit SNMP configuration settings such as the community
name.
name.
Note
❒
You can configure the ten SNMP access settings numbered 1–10.
❒
Default access settings 1 and 2 are as follows:
❖
❖
❖
❖ Display
Displays SNMP information and available protocols.
msh> snmp ?
msh> snmp [-p] [registered_number]
Note
❒
If the -p option is added, you can view the settings one by one.
❒
Omitting the number displays all access settings.
Number
1
2
Community name
public
admin
IP address
0.0.0.0
0.0.0.0
Access type
read-only
trap off
read-write
trap off