Ricoh cl7000 操作指南
Operating Instructions
Administrator Reference
209
Direct Printing Port
The direct printing port allows printing direct from a computer, connected to the network, to the printer.
Use the “diprint” command to change the direct printing port settings.
❖
❖
❖
❖ View settings
The following command displays the current direct printing port settings:
msh> diprint
Example output:
port 9100
timeout=300(sec)
timeout=300(sec)
bidirect off
•
The “Port” specifies the port number of the direct printing port.
•
The “bidirect” setting indicates whether the direct printing port is bidirectional.
❖
❖
❖
❖ Setting timeout
You can specify the timeout interval to use when receiving data from the network.
msh> diprint [30~65535]
Note
❒
The factory default is 300 seconds.
❒
If 0 is set, timeout is disabled.
❖
❖
❖
❖ Bidirectional configuration for the direct printing port
Use this setting to configure whether the direct printing port is bidirectional.
The factory default is “off”.
The factory default is “off”.
msh> diprint bidirect {on|off}