Ricoh cl7000 操作指南

This is a list of messages written in the printer's system log. The system log can be viewed using the
“syslog” command.

You can use the following methods to view the system log:

•

telnet: Use the “syslog” command. See 

Access to NetWare server <file server name> denied. Ei-
ther there is no account for this print server on the Net-
Ware server or the password was incorrect. 

(In print server mode) Cannot log on to the file server. 
Make sure the print server is registered on the file server. 
If a password is specified for the print server, delete it.

add_sess: community<community name> already de-
fined.

The same community name already exists. Use another 
one.

add_sess: session<community name>already defined.

The requested community name is not defined.

add_sess: bad trap addr:<IpAddress>, community:<com-
munity name>

The IP address (0.0.0.0.) is unavailable if the community 
access type is TRAP. Specify the host IP address for the 
TRAP destination.

add_sess_ipx: bad trap addr: <IPX address>, communi-
ty:<community name>

The IPX address (00:00:00:00:00:00) is unavailable if the 
community access type is TRAP. Specify the host IPX 
address for the TRAP destination.

add_sess_ipx: community <community name> already 
defined.

The same community name already exists. Use another 
one.