Ricoh cl7000 操作指南
Operating Instructions
Administrator Reference
35
Configuring the printer
Configure the printer to use TCP/IP.
•
Check TCP/IP is set to active. (The factory default is active.)
•
Assign an IP address and make other settings required for TCP/IP.
Reference
For more information about how to make the above settings, see “Windows XP Configuration”, Print-
er Client Reference.
er Client Reference.
If DHCP is used to assign IP addresses, see
Note
❒
After setting the IP address, use the ping command to confirm that it has been set correctly.
A
On the [
Start
] menu, point to [
All Programs
], point to [
Accessories
], and then click [
Command
Prompt
].
B
Enter the following: (Example: IP address is 192.168.15.16)
C:> ping 192.168.15.16
If the address is configured correctly, the following message appears:
Reply from 192.168.15.16 : bytes=32 time<10ms TTL=32
If the address is configured incorrectly, the following message appears:
Request timed out.