Ricoh FW770 用户指南
29
SETTING A LEADING/TRAILING EDGE MARGIN
You can set a margin on the leading or trailing edge of the copy when you use Roll Feeder (option)
in the Synchro Cut mode. When using the Bypass Table, and Preset/Variable Cut Mode you can
only set the trailing edge margin.
in the Synchro Cut mode. When using the Bypass Table, and Preset/Variable Cut Mode you can
only set the trailing edge margin.
Notes
p You can set a margin of ±99mm, ±4.0” in 1mm, 0.1” steps on either the leading or trailing edge.
p When you set a leading margin, the copy image is shifted to the trailing edge of the margin.
When you make a copy in the Bypass Table, Preset Cut, or Variable Cut mode, the copy image
might extend off the paper depending on the leading margin width.
might extend off the paper depending on the leading margin width.
1 Press the Function Select key until the “Lead-
ing Edge” or “Trailing Edge” indicator is lit.
Paper Length
Synchro
Preset/
Variable
Preset/
Variable
Leading Edge
Trailing Edge
Copy Counter
Function Select
Bypass Select/
Roll Paper Cut
Roll Paper Cut
Cut Select
Preset Cut