Ricoh FW770 用户指南

If you have problems with your copier, consult the following pages. If a
service indicator lights up, read the section below; if the original or the
copy is stuck in the copier, see page 29; if the copier won’t start, or if
copies don’t look right, see page 34.

If one of the service indicators shown below appears on the operation
panel, turn to the appropriate page and follow the instructions described
there.

        

The original or copy paper is
jammed somewhere.

See the following section.

The copier needs a technician. 

Call your technical service
center.

A cover or unit was left open.

Close it. See page 40 for a
complete list of the places to
check.

The paper roll is finished.

Put in a new roll of paper.
See page 23.

The toner cartridge is empty,
or almost empty.

Replace the toner cartridge.
See page 20.

Wait until the ready indicator
lights.

Wait. If it stays on for an
unusually long time, call your
technical service center.

The used toner bottle is full.

Empty the used toner bottle.
See page 18.