Electrovoice xi-1082 规格指南

Introducing a family of advanced sound

reinforcement products for everyone who

desires the sound quality of Electro-Voice's

X-Array™ touring systems. X-Array

Install™ is the ideal choice for small-to-me-

dium array configurations and fixed instal-

lations of any size.

Inspired by the most demanded features of

EV's acclaimed X-Array™ touring systems,

the X-Array Install™ series incorporates a

potent combination of very high output, me-

dium- to long-throw "cells," and Ring-Mode

Decoupling (RMD™).

Ring-Mode Decoupling is the same advanced

technology built into the X-Array™ touring

series. RMD™ produces substantially im-

proved tonal character and fidelity whether

operated at low or extremely high sound pres-

sure levels. RMD™ attacks time domain

"ringing modes" at their sources. Mechani-

cal solutions resolve mechanical issues,

acoustical solutions address acoustical modes

found in all sound reinforcement systems.

The combination of each RMD™ technique

provides improved tonal character and fidel-

ity at increasing drive levels. The result is

clear, even sound quality with vastly im-

proved intelligibility.

Mid-bass and high-frequency drivers in

X-Array Install™ products use ferrite mag-

netics instead of the neodymium magnetics

used in X-Array™ touring systems. While

neodymium drivers provide unmatched out-

put capabilities, the advanced RMD™ tech-

nology used in X-Array Install™ produces

world class sound reinforcement at very high

levels.

The Xi-1082 loudspeaker system is ideal for

any professional touring or installation ap-

plication requiring accurate, high-level,

sound reinforcement.  Because of the unique

performance capabilities featured in this sys-

tem, the X-Array Install™ Xi-1082 offers

extremely wide-range music reproduction as

well as accurate vocal coverage and maxi-

mized intelligibility.  It's single 8-inch woofer

avoids the mid-bane interference nulls of the

dual spaced woofers in "traditional" under

balcony systems.

Electro-Voice components and systems are

manufactured to exacting standards to en-

sure reliability in continuous use in arduous

real-life conditions.  Besides utilizing indus-

try-standard power tests, extreme in-house

power tests which push the performance

boundaries of the loudspeakers are also per-

formed for an extra measure of reliability.

The Xi-1082 systems are rated per ANSI/

EIA RS-426-A Loudspeaker Power Rating,

Full Range Test, which uses a shaped-ran-

dom-noise signal to simulate typical music

to test the mechanical and thermal capabili-

ties of the loudspeakers.  Specifically,

the Xi-1082 passes the ANSI/EIA

RS-426-A power test with the following test

parameters:

P

E(MAX)

:

175 watts

Test Voltages:

34.2 volts rms
68.3 volts peak

R

SR

(1.15 R

E

):

6.67 ohms

The Xi-1082 is fitted with several threaded

inserts and can be suspended as follows:

1. Two 3/8-16 threaded inserts are located

on each side of the enclosure to allow

the use of the Mb1082 mounting bracket.

The Mb1082 is a universal U-bracket de

signed to allow the suspension of the Xi-

1082 at any angle and orientation from