Haier hw-24ce03 用户手册

下载
页码 16
Maintenance
10
Air filter cleaning: Please clean the air filter every two weeks
When dirt accumulates in the air filter, air circulation will be blocked, and causes  poor 
cooling. It is advisable to clean the air filter every two weeks for efficient operation.
Removal of air filter
(1) Loosen the air inlet by pushing " PUSH " at 
     both edges as shown. 
(2) Open the air inlet.
(3) Hold the handle at lower part of the air filter 
     and draw outward to remove the air filter.
1. Gently tap the dirt off the air filter.
2. Carefully wash the air filter in warm water 
    (below 40 
o
C
). To obtain better cleaning 
    effect, soapy water or neutral detergent 
    may be used.
3. Flush the air filter carefully with clean water 
    after removing the dirt. Let it dry completely.
(1) Put the air filter on.
(2) Push the part marked " PUSH " until you hear a click.
Air filter cleaning
Installation of filter
Washing 
air filter
PUSH
Air inlet
PUSH
(1) Loose the air filter by pushing " PUSH "
     at both ends of air inlet.
(2) Hold the air filter by frame and lift it 
     forward for approx. 5 mm.
(3) Pull it out downward .
(1) Hold the filter by its frame and push it upward along the
     groove under air inlet until it comes to a complete stop.
(2) Push the part marked with " PUSH " until you hear a click.
For HW-24CI03:
For HW-24CE03:
For HW-24CI03:
For HW-24CE03:
WAIT 3 MINUTES BEFORE REST
ARTING
VENTILATOR
Mode selection
Temp. setting
Auto swing
PUSH
PUSH
WAIT 3 MINUTES BEFORE RESTARTING
VENTILATOR
Mode selection
Temp. setting
Auto swing