Haier ha1000tx 用户手册

Remove the package   and check that the machine is 
undamaged.
If you have any doubts, do not use the machine and call on a 
qualified technician. Keep all packing parts (plastic bag, 
foam rubber, screws etc.) out of the reach of children since 
they could be dangerous.
Important: The inside of the washing machine which 
consists of a floating unit, is fixed with screws   at the back of 
the cabinet (Fig.1) during transport. Before starting the 
machine remember to release the floating unit by   removing 
the above screws . To prevent water spray from entering the 
machine, remember to close the holes left open by the 
screws with the plastic caps provided in the packet 
containing the owner's manual. And rescrew   the holes 
where the iron piece is taken down with the former two 
screws.Attention:keep the packing screws and plastic caps 
in a safe place for later use. It is important for the machine to 
be perfectly level (the angle of inclination on the work surface 
must not be more than 2 degrees). For this reason the 
machine is fitted with adjustable feet used for levelling the 
machine before use (Fig.2). In the case of flooring with 
carpeting, remember to check that the ventilation in the 
support area is not plugged. 

Fig.1

3

Installation

Fig.2