Haier xqs52-78 用户手册

Clean

The filter screen of the water inlet valve is likely to be
blocked by foreign materials and influence the water
inlet.
Please clean it with brush every two months.

Using process

Disposal after washing

After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence
your using the machine.

The lint filter must be used during washing.
It must be cleaned in time after each using

Lint filter:

Rotate the inner tub with hand till the lint filter reaches

the position convenient for you to take it off. Pull it up to
dismount.

2.Push it down to install.

3.Clean the filter screen after washing.

Clean the detergent box and set it on
the control panel seat.
1.The method of dismantle : Push it up aslant and gently.
2.The method of install : install it upwards and aslant
and push it in .

Dismantle

Install

If the cabinet is dirty, wipe it with wet cloth
Do not flush it directly with water.
Wipe it with neutral detergent.
Do not wipe it with thinner, petrol, alcohol etc.

1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose).

Please first pull off the power plug from the receptacle before cleaning.

5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid for some time (
about 1 hour), then close the top lid.

4.Hang up the power cord and drain hose.

3.Be sure to pull off the power plug before maintenance.

2.Do not store water in the washing machine for a long period. Drain the water completely after each using.