Haier l26c1120 用户指南

23

Please make these simple checks before calling service. These tips may save you time and money 
since charges for receiver installation and adjustments of customer controls are not covered 
under your warranty.

Symptoms

Items to Check and Actions to follow

“Ghost” or double image

 This may be caused by obstructions to the antenna due to 

high rise buildings or hills. Using a highly directional antenna 
may improve the picture. 

No power

 Check if the TV’s AC power cord is plugged into the mains 

socket.

 Unplug the TV, wait for 60 seconds. Then reinsert plug into 

the mains socket and turn on the TV again. 

No picture

 Check antenna connections at the rear of the TV to see if it 

is properly connected to the TV.

 Possible broadcast station trouble. 

Try another channel.

 Adjust the contrast and brightness settings.
 Check the Closed Captions control. Some TEXT modes 

could block the screen. 

Good picture but no sound

 Increase the VOLUME.
 Check if the TV is muted; press the MUTE button on the 

remote control. 

Good sound but poor color

 Adjust the contrast, color and brightness settings. 

Poor picture

 Poor picture quality may occur when an activated S-VHS 

camera or camcorder is connected to your TV and the other 
peripheral at the same time. Switch off one of the peripherals.

Snowy picture and noise

 Check the antenna connection. 

Horizontal dotted line

 This may be caused by electrical interference (e.g. hair dryer, 

nearby neon lights, etc.)

 Turn off the equipment. 

Television not responding to 
remote control

 Check whether the batteries are working. Replace if 

necessary.

 Clean the remote control sensor lens on the TV.
 You can still use the buttons at the front of your TV.
 Select the TV mode to ensure your remote control is set in 

the TV  mode.