Newco mini-cappuccino 说明手册
Cleaning
1. Remove the drip tray with grill and empty the contents.
2. Wash and let dry the tray and grill (use a mild dishwasher detergent).
3. Wash and let dry the dispense area.
4. Turn the power switch to ON.
2. Wash and let dry the tray and grill (use a mild dishwasher detergent).
3. Wash and let dry the dispense area.
4. Turn the power switch to ON.
Flushing the Whipper Chambers (See Illustration of Membrane Switch Page 8 )
1. Push and hold any 2 dispense buttons for 3 seconds.
Whipper will run briefly to show this has been done.
2. Push and hold any dispense button to flush.
Flush will stay active as long as button is held.
3. Flush mode will end after 3 seconds of inactivity.
Whipper will run briefly to show the mode has ended.
Removing and Cleaning the Whipper Chambers (See Illustration Below and on Page 12)
1. Remove the steam cap by turning while on whipper bowl, then remove cap by pulling it
upward.
2. Remove the whipper bowl by lifting upward to free from mixing chamber, then away from
machine to disengage bowl stem from water outlet.
3. Turn the mixing chamber clockwise to disengage from whipper base and remove.
It is important that these two keyways are lined up when re-assembling the components.
upward.
2. Remove the whipper bowl by lifting upward to free from mixing chamber, then away from
machine to disengage bowl stem from water outlet.
3. Turn the mixing chamber clockwise to disengage from whipper base and remove.
It is important that these two keyways are lined up when re-assembling the components.
5