Svat gx301c 用户指南

下载
页码 14
GX301-C
7  
SVAT ELECTRONICS
now you can see
INSTALLATION
MOUNTING THE CAMERA
1.  Decide if the camera will be wall-mounted or sitting 
on a desk/tabletop. The camera can be adjusted for 
many  mounting  scenarios  by  rotating  it  to  the  re-
quired position.
•  Keep  in  mind  that  the  camera  is  microphone 
equipped. If you would like audio recorded, make 
sure the camera within a close enough range of 
the area being monitored to record   a n y 
sounds (within 6 ft)
•  Be  sure  to  mount  the  camera  no  further  then 
100ft away from your receiver 
•  Be sure to mount the camera no further then 8ft 
away from a power source 
2.  Screw  the  mounting  bracket  into  the  camera’s 
mounting hole, turning it clockwise.
4.  Ensure that the camera is strongly secured into  
the wall. 
5.  Adjust camera to the desired viewing angle.
6.  For  additional  help  with  mounting  the  camera, 
please see the drilling template, located at the back 
of the manual.
7.   Once you have mounted the camera and placed it at 
the desired viewing angle, plug the cameras power 
adapter  (marked  for  camera)  into  the  cord  on  the 
camera  and  then  plug  the  adapter  into  a  power 
source. (A surge protected power source is   
recommended.)
8.    Repeat the above steps for all additional cameras. 
Note: The above photos are examples of 
mounting a camera, your camera will 
look different from the above images.
Plug power adapter into Camera’s cord
Plug into Surge Protected power source
Adjust camera to desired viewing angle
Ensure the camera is secure