Nortel 4526T-PWR 用户指南
Configuring QoS policies
123
5
Using the fields provided, enter the parameters for the new interface
shaper entry. Interface Shaper Creation fields describes the fields
on this screen.
shaper entry. Interface Shaper Creation fields describes the fields
on this screen.
Interface Shaper Creation fields
Field
Description
Name
Denotes the name of the Interface.
Shaping Rate
Signifies the shaping rate in multiples of 64 or
1000 Kbps.
1000 Kbps.
Maximum Burst
Rate
Rate
Denotes the maximum burst rate in Kbps.
Maximum Burst
Duration
Duration
Signifies the period that the maximum burst rate
is allowed.
is allowed.
6
Click Submit.
—End—
Deleting Interface Shaping Parameters
Interface Shaping parameters can be deleted for a single port or multiple
ports.
ports.
To delete the parameters:
Step
Action
1
Open the Interface Shaper screen by selection Applications > QoS
> QoS Advanced > Interface Shaper. This screen is illustrated in
Interface Shaper screen.
> QoS Advanced > Interface Shaper. This screen is illustrated in
Interface Shaper screen.
2
In the Interface Shaper Setting section, select the Del option and
the ports that the configuration parameters are to be deleted from.
the ports that the configuration parameters are to be deleted from.
3
Click Submit.
—End—
Configuring QoS policies
QoS policies are created by creating filters in the hardware that apply a set
of packet-filtering criteria and actions to individual interfaces.
of packet-filtering criteria and actions to individual interfaces.
Nortel Ethernet Routing Switch 4500 Series
Configuration — Quality of Service
NN47205-504 (322816-
B
)
03.01
Standard
5.1
23 November 2007
Copyright © 2007, Nortel Networks
.