Nortel 4526T-PWR 安装指导
Installing an SFP
23
Prerequisites
•
Verify that the SFP is the correct model for your network configuration.
Procedure steps
Step
Action
1
Remove the SFP from its protective packaging.
2
Grasp the SFP between your thumb and forefinger.
3
As shown in the following figure, insert the device into the slot on
the module.
the module.
Apply a light pressure to the device until it clicks and locks into
position.
position.
CAUTION
Risk of equipment damage
SFPs are keyed to prevent incorrect insertion. If the SFP
resists pressure, do not force it; turn it over, and reinsert it.
resists pressure, do not force it; turn it over, and reinsert it.
4
Remove the dust cover from the optical bore and insert the fiber
optic connector.
optic connector.
—End—
Ethernet Routing Switch 4500 Series
Installation — SFPs and XFPs
NN47205-301 (324186-A)
01.04
Standard
5.1
6 December 2007
Copyright © 2007, Nortel Networks
.