Nortel 4526T-PWR 安装指南
Setting IP parameters for the Nortel Ethernet Routing Switch 4500 Series
53
IP configuration screen
5
Use the fields on the IP configuration screen to configure the IP
parameters. All fields are divided into three columns: Configurable,
In Use, and Last BootP. Use the Configurable column to configure
a new value for the field. The In Use column represents the current
value used by the switch, and the Last BootP column supplies a
value assigned to the field by a BootP request.
parameters. All fields are divided into three columns: Configurable,
In Use, and Last BootP. Use the Configurable column to configure
a new value for the field. The In Use column represents the current
value used by the switch, and the Last BootP column supplies a
value assigned to the field by a BootP request.
lists and describes the fields on the IP configuration
screen.
IP Configuration fields
Field
Description
In-Band Stack IP
Address
Address
The IP address used by the switch when it is part
of a stack.
of a stack.
In-Band Switch IP
Address
Address
The IP address used by the switch when it is a
stand-alone unit.
stand-alone unit.
In-Band Subnet
Mask
Mask
The subnet mask used by the switch.
Default Gateway
The default gateway used by the switch.
6
Click Submit.
—End—
Nortel Ethernet Routing Switch 4500 Series
Installation Guide
NN47205-300 (322811-B)
03.01
Standard
5.1
19 November 2007
Copyright © 2007, Nortel Networks
.