Nortel 2526T 用户指南
Configuring Security using Device Manager
167
Field
Description
Type
This selection specifies the type of notification sent
to a management target address. If the value is trap,
sent messages contain SNMPv2-Trap PDUs. If the
value is inform, messages contains Inform PDUs.
to a management target address. If the value is trap,
sent messages contain SNMPv2-Trap PDUs. If the
value is inform, messages contains Inform PDUs.
ATTENTION
If an SNMP entity only supports trap (and not
inform) messages, this object can be read-only.
inform) messages, this object can be read-only.
StorageType
Specifies whether this table entry (row) will be stored
in volatile or nonvolatile memory. If the entry is stored
in volatile memory, it does not persist if the switch
loses power.
in volatile or nonvolatile memory. If the entry is stored
in volatile memory, it does not persist if the switch
loses power.
2
Click Insert.
The Notify Table, Insert dialog box appears .
The following figure displays the Notify Table, Insert dialog box.
Figure 54
Notify Table, Insert dialog box
Notify Table, Insert dialog box
3
Enter a Name for this table row.
4
Enter a Tag name which connects this entry to one or more Target
Address table entries.
Address table entries.
5
Specify the Type of message Protocol Data Units (PDUs) to send to
an associated Management Target Address: trap or inform.
an associated Management Target Address: trap or inform.
6
Specify the StorageType.
7
Click Insert.
The new notify entry is shown in the list.
The new notify entry is shown in the list.
Nortel Ethernet Routing Switch 2500 Series
Security — Configuration and Management
NN47215-505 (323165-B)
02.01
Standard
4.1
19 November 2007
Copyright © 2007, Nortel Networks
.