Nortel 2526T 用户指南
62
Configuring Security using the CLI
Table 18
snmp-server community for read/write command parameters and variables
snmp-server community for read/write command parameters and variables
Parameters and variables
Description
<community-string>
Changes community strings for SNMP v1 and
SNMPv2c access. Enter a community string
that functions as a password and permits
access to the SNMP protocol. If you set the
value to
SNMPv2c access. Enter a community string
that functions as a password and permits
access to the SNMP protocol. If you set the
value to
NONE
, it is disabled.
ATTENTION
This parameter is not available when
Password Security is enabled, in which
case, the switch prompts you to enter and
confirm the new community string.
Password Security is enabled, in which
case, the switch prompts you to enter and
confirm the new community string.
ro|rw
Specifies read-only or read/write access.
Stations with
Stations with
ro
access can retrieve only
MIB objects, and stations with
rw
access can
retrieve and modify MIB objects.
ATTENTION
If neither
ro
nor
rw
is specified,
ro
is
assumed (default).
no snmp-server community command
The
no snmp-server community
command clears the snmp-server
community configuration. The syntax for the
no snmp-server
community
command is:
no snmp-server community {ro|rw|<community-string>}
The
no snmp-server community
command is executed in the Global
Configuration command mode.
If you do not specify a read-only or read/write community parameter, all
community strings are removed, including all communities controlled
by the
community strings are removed, including all communities controlled
by the
snmp-server community
command and the
snmp-server
community
command for read-write.
Nortel Ethernet Routing Switch 2500 Series
Security — Configuration and Management
NN47215-505 (323165-B)
02.01
Standard
4.1
19 November 2007
Copyright © 2007, Nortel Networks
.