Nortel 2526T 用户指南
Securing your system
73
Table 31
no snmp-server user command parameters and variables
no snmp-server user command parameters and variables
Parameters and
variables
variables
Description
engine-id
<engineid>
Specifies the SNMP engine ID of the remote SNMP
entity.
entity.
<username>
Specifies the user to be removed.
snmp-server view command
The
snmp-server view
command creates an SNMPv3 view. The view
is a set of MIB object instances that can be accessed. The syntax for the
snmp-server view
command is:
snmp-server view <view-name> <OID> [<OID> [<OID>
[<OID> [<OID> [<OID> [<OID> [<OID> [<OID> [<OID>]]]]]]]]]
The
snmp-server view
command is executed in the Global Configuration
command mode.
T
describes the parameters and variables for the
snmp-server view
command.
Table 32
snmp-server view command parameters and variables
snmp-server view command parameters and variables
Parameters and
variables
variables
Description
<viewname>
Specifies the name of the new view; enter an
alphanumeric string.
alphanumeric string.
<OID>
Specifies the Object identifier.
OID
can be entered as
a MIB object English descriptor, a dotted form
OID
, or
a mix of the two. Each
OID
can also be preceded by a
plus (+) or minus (–) sign (if the minus sign is omitted, a
plus sign is implied). For the dotted form, a subidentifier
can be an asterisk (*), which indicates a wildcard. Some
examples of valid
plus sign is implied). For the dotted form, a subidentifier
can be an asterisk (*), which indicates a wildcard. Some
examples of valid
OID
parameters are as follows:
Nortel Ethernet Routing Switch 2500 Series
Security — Configuration and Management
NN47215-505 (323165-B)
02.01
Standard
4.1
19 November 2007
Copyright © 2007, Nortel Networks
.