Nortel 1100 安装指导
62
Chapter 3 Nortel VPN Router 1700 and 1600 option installation
NN46110-317 02.01
To install or replace a DIMM:
1
Shut down the VPN Router 1700 or 1600 using the Web GUI or the CLI, and
then unplug it as described in
then unplug it as described in
2
Remove the front bezel from the chassis, and then remove the chassis from the
equipment rack (see
equipment rack (see
).
3
Remove the top cover from the chassis (see
4
Attach the antistatic wrist strap that was shipped with the VPN Router 1700
(see
(see
).
5
If you are replacing a DIMM, remove the installed DIMM as follows:
a
Press down the locking lever on either side of the DIMM (
).
b
Pull the DIMM up to remove it from the slot.
6
Press down the locking lever on either side of the slot where you plan to
install the DIMM (
install the DIMM (
7
Place the new or replacement DIMM in the slot (
Use the alignment keys to properly position the DIMM in the slot.
8
Press the DIMM firmly into the socket.
9
Pull up the locking lever on either side of the DIMM to snap it into position.
Caution: Install the same type of DIMM that is already installed in your
gateway. For example, do not install a 256 MB DIMM in the VPN
Router 1700 or 1600.
gateway. For example, do not install a 256 MB DIMM in the VPN
Router 1700 or 1600.
Warning:
Risk of electric shock
Turn off the gateway and unplug it before you attempt to install a
DIMM.
DIMM.